Skip to the stories
Robotics & Automation

Hazards 36 Day One: Energy Transition Risk and Leadership Accountability in Manchester

  • Christopher Garcia
  • 443 reads

Day one of IChemE's Hazards 36 in Manchester centred on energy transition risks, carbon capture, autonomous plant inspection and leadership accountability.

Hazards 36 Day One: Energy Transition Risk and Leadership Accountability in Manchester

Process safety engineers gathered at Old Trafford Cricket Ground in Manchester on a wet, cold afternoon, and the first day of IChemE's Hazards 36 Process Safety Conference made one thing clear: the field is being pulled in two directions at once. New energy technologies are arriving faster than the risk frameworks around them, and the people in the room want to know how to close that gap. More than 300 industry professionals attended.

Posters, pain points and a robot on the exhibition floor

Before the main sessions started, research posters and exhibition stands filled every room of the venue. The energy was practical rather than abstract. Presenters raised specific pain points, including the need for a better hazard assessment method for road tankers. Another thread focused on building new risk profiles for decarbonisation equipment, with carbon capture getting the most attention. Carbon capture systems introduce process conditions and failure modes that older plant risk models weren't written to cover, so this is where the detailed work is happening.

The exhibition hall mixed established plant safety kit with more forward-looking hardware. Japanese engineering firm Yokogawa showed its ANYmal autonomous robot, which the company developed with a software system to help plant operators inspect sites. For anyone who has spent a shift walking a unit with a gas detector and a clipboard, a robot that can patrol and report on routine inspection points is an obvious thing to watch. The practical questions are the ones you'd expect: how inspection data feeds into existing maintenance and permit systems, and where a human still has to make the call.

Hydrogen, wind and solar: the new risk stack

The energy transition was the dominant theme. Low-carbon sources bring their own hazards to manage. Hydrogen raises the explosion risk question and the cost-efficiency question at the same time. Wind and solar bring a different set of problems: output that varies with weather, and the need for energy storage to smooth supply. Speakers examined the factors involved in building a new energy system and made the case that process safety sits at the centre of the transition rather than at its edge.

Hari Vamadevan, SVP and regional director for DNV UK, put the timeline bluntly: "Fossil fuels will not go away all at once – they can't. We need further investment into them as well as renewables to make sure we can manage the decline in its production, without destabilising the energy mix." His point was that the transition is a managed overlap, not a switch. Plants will run old and new assets side by side for years, and each of those assets carries its own hazard profile.

That's the trade-off he kept returning to. Every technology has a different risk signature, and choosing one means accepting its particular exposure. Vamadevan went further, saying: "Energy production is inherently exploitative, as you need significant land and resources to scale and provide stable energy. With this we have to make a decision on what risk we want to manage." That framing is useful because it moves the discussion away from "which technology is safe" and towards "which risks are we prepared to own, and how well do we manage them?"

Accountability doesn't change with the technology

Dr Zsuzsanna Gyenes pushed the same argument from a different angle. She stressed the role of senior leaders in grounding the transition in core process safety principles. Her central line was this: "Though we may not have new types of hazards, the technology will change, but at the same time taking accountability and responsibility cannot change. And the fact that you are all here shows that."

That's a point many plant teams already feel in practice. A new electrolyser or capture unit may bring unfamiliar chemistry, but the management system that decides who signs off a change, who checks the barriers and who stops work when something looks wrong is the same one that's always mattered. If anything, a fast-moving technology puts more weight on that system, because the procedures are still being written while the equipment is being commissioned.

The accountability theme carried into the parallel sessions and coffee breaks. Attendees widely agreed that many operational risks could be reduced with better communication between engineers and operators. Engineers design the barriers, operators live with them, and when the two groups don't talk, assumptions drift out of alignment. Plenty of incident investigations trace back to exactly that kind of gap.

Where the responsibility lands

Shakeel H Kadri, chief engineer for the American Institute of Chemical Engineers and CEO of the Center for Chemical Process Safety, took the communication point further. He placed the responsibility for it squarely on business leaders. In practical terms, that means leaders have to fund the time, the forums and the feedback loops that let operators challenge a design before it goes live, rather than treating communication as something that happens informally on the shop floor.

Kadri delivered the annual Trevor Kletz lecture. He described how process safety grew in importance over a long career built largely at chemicals firm Air Products, where he became director of global process safety and risk management. His conclusion was personal and direct: "I started my career as a process engineer, and I can say from my experience I know that process safety is the most important value to have to lead a company."

What to watch from day one

The threads from the first day point in a few clear directions. Hazard assessment methods for road tankers and carbon capture will need to be developed in detail before they can be applied widely. Hydrogen and renewables-plus-storage projects will need risk profiles that reflect their actual operating conditions, not borrowed templates. And autonomous inspection tools like the ANYmal platform will need clear rules on how their findings are recorded, verified and acted on.

My read is that the most useful takeaway isn't any single technology. It's the insistence that the management system matters as much as the hardware. Plants adopting new energy systems will be judged on how well they handle the risks they've chosen to carry, and on whether engineers and operators are working from the same picture. That's a harder job than buying a new robot, and it's the part that day two of the conference is likely to keep pressing on.

Source: Christopher Garcia · www.thechemicalengineer.com

From the same set